Case & terminals
Confirm the available space, securing method, terminal orientation and cable reach.

E series · Sodium-ion
Motorcycle starter battery. Review the model, fit and protection configuration for your application.
Product photograph. Confirm supplied configuration and label.
Model reference
Electrical and dimensional data from the manufacturer's 25 May 2026 catalogue.
Current supply discussions include BMS overcharge protection. Confirm the exact protection configuration and current specification for your order.
| Nominal voltage | 12 V |
|---|---|
| Capacity | 4.5 AhThe catalogue table does not state the capacity test rate. |
| Dimensions (L × W × H) | 150 × 85 × 95 mmCatalogue tolerance ±2 mm. |
| Terminal polarity | Positive left / negative rightConfirm the terminal view on the supplied sample. |
| Metered CA | 135 AAt 25 ± 2°C, using the manufacturer’s catalogue terminology. |
| Metered CCA | 67.5 AAt −18 ± 2°C. Full test protocol is not supplied in the catalogue. |
| Continuous charging power | 190 W |
| Continuous discharging power | 240 W |
| Catalogue operating range | 0–75°CThe table does not separate charging and discharging limits. Obtain model-specific guidance. |
| Protection configuration | BMS · Overcharge protectionConfirm the supplied configuration. Additional BMS functions are not assumed. |
VEKEN SIB Introduction · 25 May 2026 · page 19. Values are kept together from this catalogue edition; the exact supplied specification is confirmed for the order.
Metered CA, Metered CCA and MCA printed on product labels are different stated ratings. They are not interchangeable merely because each is expressed in amperes. No starting-current ratio is claimed across different test methods.
Some older specifications, packaging tables and image labels describe other revisions. Current weight, charging limits, complete test protocol and protection configuration should be requested for the supplied model.
Selection starting point
The manufacturer lists these lead-acid references for model selection:
References do not establish fit or compatibility. Check tray dimensions, mounting, cable reach, polarity, vehicle charging limits and starting requirements.
Before an order
Bring the model reference into the context of the motorcycle and your market.
Confirm the available space, securing method, terminal orientation and cable reach.
Review the supplied voltage limits, charging requirements and starting tests at the required temperature.
Discuss your quantity, sample objective and market documentation before confirming the order.
Email the model, destination, expected quantity and your sample or technical questions.
E series
115 × 70 × 110 mm · Dimension reference
View specifications ↗
E series
115 × 70 × 130 mm · Product image
View specifications ↗
E series
150 × 85 × 105 mm · Product image
View specifications ↗